Angles Explained - FX-Mount

30° - Angle

  • Obstructs XLR Releases, will require a small tool to help hit the latches.
  • Lowers the mic, Smaller Profile for packing like the OEM Stock mic mount.
  • Less interference with onboard 5" and 7" monitors, with certain setups can support full tilt monitors.
  • Causes heavier mics to SAG more, so will require little Lyre O-Ring rubber supports.

0° - Angle

  • Will not obstruct XLR Releases.
  • Slightly Higher mic than usual.
  • Less mic/lyre SAG with heavier mics, can still require little Lyre O-Ring rubber supports.

Back to blog